公司信息及水印
牌号简介 About |
---|
G50-100是一种高分子量、高密度聚乙烯共聚物,开发用于片材挤出、热成型和大面积吹塑,其中成品要求优异的物理性能。该材料符合21 CFR 177.1520的食品和药品管理局要求。 G50-100 is a high molecular weight, high density polyethylene copolymer developed for sheet extrusion, thermoforming, and large part blow molding where the finished product demands outstanding physical performance. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.950 | g/cm³ | ASTM D4883 |
高负荷熔体指数 High load melt index |
10 | g/10 min | ASTM D1238 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
70.0 | ℃ | ASTM D648 |
维卡软化温度 Vicat Softening Temp |
|||
|
130 | ℃ | ASTM D1525 |
线性热膨胀系数 Linear coefficient of thermal expansion |
1.20E-4 | 1/℃ | ASTM D696 |
脆化温度 Embrittlement temperature |
℃ | ASTM D746 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
0.75mm 0.75mm |
UL-94 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
ASTM D2240 | ||
拉伸强度 tensile strength |
|||
屈服,23℃ Yield, 23 ℃ |
MPa | ASTM D638 | |
断裂,23℃ Fracture, 23 ℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
拉伸冲击强度 Tensile impact strength |
kJ/m² | ASTM D1822 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
弹性模量 Elastic modulus |
MPa | ASTM D638 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
【新闻资讯】查看全部
洛阳石化百万吨乙烯项目可研报告进入评估阶段
2021-10-24 搜料网资讯: 近日,中国石化集团公司在北京召开会议,邀请中国化工学会、中国合成橡胶工业协会等10余个单位专家,以及相关代表组成评估专家组,分别对洛阳石化百万吨 乙烯 项目 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |