牌号简介 About |
---|
龙皮硅酮是一种高性能的铂固化液态硅酮化合物,用于各种应用,从创造皮肤效果和其他电影特效到制作用于铸造各种材料的生产模具。由于龙皮橡胶具有优异的物理性能和柔韧性,因此也可用于医疗假肢和缓冲应用。龙皮橡胶也用于各种工业应用,其工作温度范围为-70°F至+400°F(-21°C至+205°C)。非常适合制作各种应用的模具-可在肖氏10a,20a和30a,龙皮硅酮可用于制作非常坚固和耐撕裂的模具,用于铸造石膏,蜡,混凝土,树脂和其他材料。经过时间考验,用途广泛的特效材料-柔软,超强,有弹性,龙皮10(快,中,慢速度)在世界各地被用来制作壮观的皮肤和生物效果。通过添加硅生猪硅颜料或铸造魔法效果粉末,可以获得无限多的颜色效果。固化橡胶也可以涂上心理油漆系统。使用方便-龙皮硅胶按重量或体积混合1a:1b。液体橡胶可以用硅酮稀释剂稀释或用Thi-Vex II增稠。橡胶在室温(73°F/23°C)下固化,收缩率可忽略不计。建议采用真空脱气,以尽量减少硫化橡胶中的气泡。 Dragon Skin® silicones are high performance platinum cure liquid silicone compounds that are used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials. Because of the superior physical properties and flexibility of Dragon Skin® rubbers, they are also used for medical prosthetics and cushioning applications. Dragon Skin® rubbers are also used for a variety of industrial applications and have a service temperature range of a constant -70°F to +400°F (-21°C to + 205°C). Great for Making Molds for a Variety of Applications - Available in Shore 10A, 20A and 30A, Dragon Skin® silicones can be used to make exceptionally strong and tear resistant molds for casting plaster, wax, concrete (limited production run), resins and other materials. Time Tested, Versatile Special Effects Material - Soft, super-strong and stretchy, Dragon Skin® 10 (Very Fast, Fast, Medium and Slow speeds) is used around the world to make spectacular skin and creature effects. An infinite number of color effects can be achieved by adding Silc Pig® silicone pigments or Cast Magic® effects powders. Cured rubber can also be painted with the Psycho Paint® system. Cured material is skin safe and certified by an independent laboratory to ISO 10993-10, Biological evaluation of medical devices, Part 10: Tests for irritation and skin sensitization. Easy To Use - Dragon Skin® silicones are mixed 1A:1B by weight or volume. Liquid rubber can be thinned with Silicone Thinner® or thickened with THI-VEX®. Rubber cures at room temperature (73°F/23°C) with negligible shrinkage. Vacuum degassing is recommended to minimize air bubbles in cured rubber. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.07 | g/cm³ | ASTM D1475 |
特定体积 Specific volume |
0.932 | cm³/g | ASTM D1475 |
收缩率 Shrinkage rate |
|||
MD MD |
< 0.10 | % | ASTM D2566 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
10 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂 fracture |
3.28 | MPa | ASTM D412 |
100% 应变 100% strain |
MPa | ASTM D412 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D412 | |
撕裂强度 tear strength 2 |
kN/m | ASTM D624 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
储存稳定性 storage stability |
min | ASTM D2471 | |
热固性混合粘度 Thermosetting mixed viscosity |
cP | ASTM D2393 | |
脱模时间 stripping time |
min | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
混合比 Mixing ratio |
|||
工作温度 working temperature |
℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 B 模具 |
【新闻资讯】查看全部
明年3月,东丽将在日本销售源自废旧渔网的再生尼龙6纤维产品
2022-12-14 扫描上图二维码,可以免费下载 搜料 APP 2022年12月5日,东丽宣布,将从2023年3月开始在日本销售尼龙6化学再生纤维(N6CR)纱线、纺织品和其他产品。这些产品应用东丽的解聚和再聚合 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |