牌号简介 About |
---|
H-700通过反应挤出法制备了马来酸酐接枝弹性体的乙烯-辛烯共聚物(POE),基材的选择。H-700具有较低的凝胶、接枝率、色光,广泛应用于工程塑料(PA6、PA66、PBT等)的增韧改性中,也可作为增容剂来改善玻璃纤维、填料和基体树脂的相容性,大大改善树脂或树脂金属在多L中的粘附性。艾耶尔共挤。典型应用PA6、PA66、PBT等工程塑料玻璃纤维增韧剂,填充PBT-DO增容剂的PA,提高PA/PP合金相容剂界面相容性,增强树脂与金属间多层共挤薄膜树脂层的粘结性能。 H-700 by reactive extrusion into the legal system of maleic anhydride grafted elastomer copolymer of ethylene and octene copolymer ( POE ) , substrate selection . H-700 has a low gel, grafting ratio, light in color, which is widely used in engineering plastics ( PA6 , PA66 , PBT , etc.) of toughening modification; also can be used as a compatibilizer to improve the glass fiber, fillers and the compatibility of the matrix resin; and greatly improve the adhesion between the resin or resin metal in the multi-layer co-extruded. Typical applications PA6 , PA66 , PBT , and other engineering plastics flexibilizer of glass fiber reinforced and fill the PA of PBT do compatibilizer to improve the interface compatibility performance PA / PP alloy compatibility agent Bond performance of the multi-layer co-extruded film resin layer between the resin between the metal |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.890 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,10.0kg 230℃,10.0kg |
4.0 | g/10min | ASTM D1238 |
MAH 接枝水平 MAH grafting level |
Gao | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
95 | ASTM D2240 | |
拉伸强度 tensile strength |
10.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790A |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
陶瓷成型用塑料模具的研讨
2016-01-28 中国塑料陶瓷成型用塑料模具的研究李铁军(湖南省塑料研究所,湖南长沙410001)。石膏一直是制作陶瓷模具的主要材料。石膏模的优点是气孔率分布均匀,壁厚均匀,能脱水,泥坯在干燥过程中收缩均匀,十分有利于脱模。但石膏模有其不可克服的缺陷,例如,石膏在水中的可溶性使模具容易侵蚀,反复使用后表面变得粗糙;石膏模耐磨性差,与泥坯之间的摩擦而造成的磨损十分严重,而耐磨性是决定模具寿命的最重要因素;加水硬化后的石膏在水中的分解温度约60在模具干燥中由于组分变化和热冲击作用而容易导致模具破坏;冲击强度、弯 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |