牌号简介 About |
---|
是热塑性弹性体(TPE-S)的商业名称,基于SBS,SEBS(苯乙烯-丁二烯-苯乙烯;苯乙烯-乙烯-丁二烯-苯乙烯)嵌段共聚物,通过混合SBS,SEBS,…含聚烯烃的弹性体,如PP、PE、EVA等对酸、碱和所有水溶液的耐受性都很好。对酒精和乙二醇的抗性中等。对芳香烃、脂肪和油的抵抗力很差。向上抵抗圆系列松弛增加。所有的“Solplasts”都有很好的体积电阻:超过1012欧姆厘米。在聚烯烃基(PE、PP、EVA)上使用上色母料。以SBS嵌段共聚物为基料的7000系列工艺配方,具有不同的物理特性和光学性能。工作温度在-50 in+60°C之间。适用于不暴露于光(紫外线)和更高温度的应用。7000C更换TPU Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS, SEBS (styrene - butadiene - styrene; styrene - ethilene butadiene - styrene) block copolymers, gathered with mixing SBS, SEBS, ... elastomers with polyolefines such as PP, PE, EVA, ... Resistance to acid, bases and all aqueous solutions is excellent. Resistance to alcohol and glycols is medium good. Resistance to aromatic hydrocarbons, fat and of oil is bad. Resistace round series upwards loosely increases. All "SOLPLASTS" have a good electric-volume resistance: thats more then 1012 ohm-cm. For coloring masters are used on a polyolefine base (PE, PP, EVA). SERIES 7000 Technical compaund on SBS block copolymers base; Different phisical characteristics and optics considering purpose of use. Work temperature between - 50 in + 60° C. For aplications with no explicite exposure to the light (UV) and higher temperatures. 7000C Replace for TPU |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.940 到 0.980 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
20 到 40 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
ISO 868 | ||
邵氏 A Shaw's A |
75 | ISO 868 | |
邵氏 D Shaw's D |
40 | ISO 868 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
韧性比ABS强10倍-新型热塑性塑料ABL
2016-04-15 美国能源部橡树岭国家实验室的研究人员以木质素为材料,研发出一种高韧性的新型热塑性塑料,其韧性比ABS强10倍,命名为ABL。 研究人员发明一项无需溶剂的生产工艺(用木质素形成木质细胞壁,取代ABS中的苯乙烯成分),可连接分散在合成橡胶体中的均等的纳米级木质素部分,使之生产可熔可塑易延展、韧性比ABS强10倍的材料ABL。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |