牌号简介 About |
---|
Durez® 33790是一种高性能的两步粉末状酚醛树脂。建议在制造盘式制动片时使用应用Durez® 33790。功能Durez® 33790提供以下功能:增加韧性增加弹性快速固化低游离酚无尘 Durez 33790 is a high performance, two-step phenolic resin in powder form. APPLICATION Durez 33790 is recommended for use in the manufacture of disc brake pads. FEATURES Durez 33790 provides the following: Added toughness Increased flexibility Fast cure Low free phenol Dust free |
技术参数 Technical Data | |||
---|---|---|---|
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Hexa Hexa |
11 | % | 内部方法 |
Inclined Plate Flow(Cold,125℃) Inclined Plate Flow(Cold,125℃) |
2.00 | cm | 内部方法 |
筛孔 Sieve pore |
|||
200 Mesh 200 Mesh |
2.5 | % | 内部方法 |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
|||
160℃ 160℃ |
6.3E-3 | hr | 内部方法 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
注塑机调机调试工艺的三个步骤
2016-07-26 1、参数设定前需确认及预备设定参数 ⑴确认材料干燥、模温及加热筒温度是否被正确设定并达到可加工状态。 ⑵检查开闭模及顶出的动作和距离设定。 ⑶射出压力(P1)设定在最大值的60%。 ⑷保持压力(PH)设定在最大值的30%。 ⑸射出速度(V1)设定在最大值的40%。 ⑹螺杆转速( |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |