牌号简介 About |
---|
杜邦特氟隆聚四氟乙烯Disp 35是一种乳白色水性聚四氟乙烯分散液,用阴离子分散剂稳定。它用于与各种填料共凝,以生产具有应用所需的各种强度、多孔性和颜色的产品。使用增强剂可提供以下优点:提高抗穿透性和耐磨性、增加尺寸和形状稳定性、更高的散热率和更大的耐磨性。经适当处理后,Disp 35中的聚四氟乙烯树脂表现出氟聚合物树脂典型的优越性能:在260°C(500°F)下使用后保持性能,在-240°C(-400°F)下保持有用性能。Disp 35水分散液提供:对几乎所有工业化学品和溶剂的共凝惰性的能力高温下的稳定性优异的介电性能任何固体材料的最低摩擦系数不粘特性典型应用Disp 35用于制备用于高浓度涂料的混合物。性能轴承和密封件。Disp35还可以与特殊成分共凝,形成特定的最终用途,如燃料电池电极。特氟隆聚四氟乙烯Disp 35符合ASTM D 4441-98,I型,2级,A级的要求。 DuPont™ Teflon ® PTFE DISP 35 is a milky white aqueous PTFE dispersion stabilized with an anionic dispersant. It is used for co-coagulation with various fillers to produce products with a range of strengths, porosities and colors required for the application. The use of reinforcing agents can offer such advantages as improved resistance to cut-through and abrasion, increased dimensional and form stability, higher rate of heat dissipation and greater resistance to wear. When properly processed, the PTFE resin in DISP 35 exhibits the superior properties typical of the fluoropolymer resin: retention of properties after service at 260 °C (500 °F), and useful properties at -240 °C (-400 °F). DISP 35 aqueous dispersion provides: ability for co-coagulation inertness to nearly all industrial chemicals and solvents stability at high temperatures excellent dielectric properties lowest coefficient of friction of any solid material non-stick characteristics Typical Applications DISP 35 is used in the preparation of blends for coating of high performance bearings and seals. DISP 35 can also be co-coagulated with special ingredients to be formed into specific end-uses, such as fuel cell electrodes. Teflon ® PTFE DISP 35 meets the requirements of ASTM D 4441-98, type I, grade 2, class A. |
技术参数 Technical Data | |||
---|---|---|---|
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面活性剂含量 - based on PTFE solids Surfactant content - based on PTFE solids |
|||
-- -- |
2.2 | % | ASTM D4441 |
-- -- |
2.2 | % | ISO 12086 |
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
-- -- 2 |
2.21 | g/cm³ | ASTM D4895 , ISO 12086 |
-- -- 3 |
1.25 | g/cm³ | ISO 8962 , ASTM D4441 |
pH值 PH value |
|||
-- -- |
10.0 | ASTM E70 | |
-- -- |
ISO 1148 | ||
固体含量 - % PTFE by weight Solid content -% PTFE by weight |
|||
-- -- |
% | ASTM D4441 | |
-- -- |
% | ISO 12086 | |
平均颗粒尺寸 Average particle size |
nm | 内部方法 | |
布络克菲尔德粘度 Brookfield viscosity |
|||
25℃ 25℃ |
mPa·s | ASTM D2196 | |
25℃ 25℃ |
mPa·s | ISO 2555 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 of Sintered Resin |
3 at 35% solids |
【新闻资讯】查看全部
EIA短期能源展望报告:美国原油产量降幅或低于预期 上修主要产销预测
2021-07-08 搜料网资讯: 美国能源信息署(EIA)在官网上发布了7月短期能源展望报告。报告预计美国2021年的原油产量将出现下降,但降幅低于此前的预期,而主要的产量和消费预测相较6月的报告 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |