牌号简介 About |
---|
SABIC® SUPEER™ 8115L is an ethylene-octene copolymer produced via Nexlene™ Technology. It performs well in a wide range of general purpose and high performance LLDPE blown film applications and has good processablity. The grade offers better performance in terms of tensile properties, stiffness / toughness ratio and optical properties. Application Typical applications for SABIC® SUPEER™ 8115L are lamination film, frozen bags, liquid pouches, heavy duty bags, industrial liner, agriculture film, stretch hood, surface protective film. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.15 | g/cm³ | ISO 1183 |
熔体体积流动速率 Melt Volume Rate |
|||
220℃ 220℃ |
7 | cm³/10min | ISO 1133 |
收缩率 Shrinkage rate |
0.5~0.7 | % | ISO 294-4 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁冲击强度 Charpy impact strength |
|||
23℃ 23℃ |
50 | kJ/m² | ISO 179 |
-30℃ -30℃ |
25 | kJ/m² | ISO 179 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
℃ | ISO 75 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
cm/cm/℃ | ISO 11359-2 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
MPa | ISO 527 | |
拉伸模量 Tensile modulus |
MPa | ISO 527 | |
弯曲强度 bending strength |
MPa | ISO 178 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ISO 2039 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 F50 |
【新闻资讯】查看全部
"2019发明界的奥斯卡奖"揭晓陶氏、美利肯等纷纷上榜
2021-04-19 搜料网资讯: 耐高冲击的生物基树脂、可印刷电池、可注塑成型的有机硅,可用于3D打印的聚乙烯基成型材料近日素有发明界奥斯卡之称的2019 RD 100大奖揭晓,数项创新材料解决方案荣登 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |