牌号简介 About |
---|
Formolene® HB5502Z通过将硬脂酸锌与树脂结合,消除了在每台机器上添加脱模剂的需要。这种结合保证了一致的释放特性。它可以用作注射吹塑树脂。Formolene® HB5502Z符合美国食品和药物管理局在21CFR 177.1520中规定的所有要求,包括用于直接食品接触的聚烯烃制品的安全使用。 Formolene® HB5502Z eliminates the need for including a mold release agent at each machine, by incorporating zinc stearate with the resin. This incorporation assures uniform consistent releasing properties. It may be used as an injection blow molding resin. Formolene® HB5502Z meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.955 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
0.35 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
23℃ 23℃ |
27.60 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
600 | % | ASTM D638 |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
1380 | MPa | ASTM D790 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature |
℃ | ASTM D746 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 4, 2.0 in/min |
【新闻资讯】查看全部
鸿志新材:沉淀硫酸钡M-700K2
2021-05-15 搜料网资讯: 一、沉淀硫酸钡M-700K2介绍 1.1产品介绍 M-700K2是云浮鸿志新材料有限公司采用全新的硫酸法工艺生产,用碳酸钡加硫酸进行反应,生成超细沉淀硫酸钡。采用偶联剂改性处理 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |