牌号简介 About |
---|
Unitrex Peek是一种半结晶高温热塑性塑料,为设计工程师提供了一种真正独特的性能特征组合。与其他工程聚合物相比,该材料在所有性能类别中都是最好或几乎最好的。Unitrex Peek的相对热指数为480°F,具有UL 94的可燃性等级V-0,具有极低的烟雾生成和有毒气体排放水平。此外,这种材料具有优良的电性能,在温度和频率范围内保持稳定。Unitrex PEEK在化学上对各种有机和无机液体都有抵抗力,并且不溶于所有常见的溶剂。此外,它不受蒸汽和热水的影响,并且具有非常低的吸湿率。这种材料提供了优越的尺寸稳定性和机械容易。虽然未填充的Unitrex Peek具有良好的耐磨性,但Unitrex L已经用石墨和聚四氟乙烯进行了强化,以提供低摩擦和增强磨损的理想组合。对于需要提高强度和刚度的应用,可提供30%玻璃纤维填充等级(Unitrex RG-30)。未填充的Unitrex Peek原料形状为浅米色,可从NYTEF Plastics获得各种大规格杆、板和管状杆尺寸。产品属性480°F相对热指数温度优秀的强度、刚度和韧性,即使在高温下,化学性耐所有常见溶剂低吸水性优异的电气性能优异的尺寸稳定性额定值UL V-0,具有低烟雾和有毒气体排放,易于机加工和制造。D符合FDA标准的Unitrex RG 30%玻璃纤维填充等级,用于提高强度和刚度UNITREX® L轴承和磨损等级,提供较低的摩擦系数,并改善耐磨性工业、医疗和制药飞机以及航空航天流体处理、电气和电子制造、汽车和运输石油。工业应用医疗器械分析仪器半导体晶片处理部件压缩机部件和密封件泵耐磨环轴承和衬套 Unitrex PEEK is a semi-crystalline high temperature thermoplastic that offers design engineers a truly unique combination of exceptional performance characteristics. When compared with other engineering polymers, this material ranks as the best or nearly the best in every performance category. Unitrex PEEK has a relative thermal index of 480°F and has a UL 94 flammability rating of V-0, with very low levels of smoke generation and toxic gas emission. Additionally, this material exhibits excellent electrical properties, which remain stable over a wide range of both temperatures and frequencies. Unitrex PEEK is chemically resistant to a wide range of organic and inorganic liquids and is insoluble in all common solvents. In addition, it is unaffected by steam and hot water and has a very low moisture absorption rate. This material offers superior dimensional stability and machines easily. While unfilled Unitrex PEEK offers good wear resistance, Unitrex L has been reinforced with graphite and PTFE to provide an ideal combination of low friction and enhanced wear. For applications that require improved strength and stiffness, a 30% glass fiber filled grade is available (Unitrex Rg-30). Unfilled Unitrex PEEK stock shapes are light beige in color and are available from Nytef Plastics in a full range of heavy gauge rod, plate and tubular bar sizes. PRODUCT ATTRIBUTES 480°F relative thermal index temperature Excellent strength, rigidity and toughness, even at elevated temperatures Chemically resistant to all common solvents Low moisture absorption Superior electrical properties Exceptional dimensional stability Rated UL V-0 with low smoke and toxic gas emissions Easily machined and fabricated FDA compliant UNITREX Rg 30% Glass fiber filled grade for improved strength and stiffness UNITREX L Bearing and wear grade offers lower coefficient of friction and improved wear resistance INDUSTRIES Medical and pharmaceutical Aircraft and aerospace Fluid handling Electrical and electronics manufacturing Automotive and transportation Petroleum industry APPLICATIONS Medical instruments Analytical instrumentation Semiconductor wafer handling components Compressor components and seals Pump wear rings Bearings and bushings |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.44 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
ASTM D570 | ||
24hr 24hr |
0.060 | % | ASTM D570 |
饱和 saturated |
0.35 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
8270 | MPa | ASTM D638 |
拉伸强度 tensile strength |
|||
屈服 yield |
141 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
摩擦系数 friction coefficient |
内部方法 | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
熔融峰值温度 Melting peak temperature |
℃ | ASTM D3418 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
相对温度指数 Relative temperature index |
℃ | UL 746 | |
电气性能 Electrical performance |
℃ | UL 746 | |
冲击机械性能 Impact mechanical performance |
℃ | UL 746 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
3.20 mm 3.20 mm |
UL 94 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
投资超29亿!扬子巴斯夫一体化项目扩建,涉及环氧乙烷、丙烯酸叔丁酯
2021-05-24 搜料网资讯: 近日,南京江北新区管理委员会官网对扬子石化-巴斯夫有限责任公司一体化2.8期扩建项目环境影响评价全本公示。项目涉及的产品包括丙醛、丙酸、乙醇胺、乙烯胺、丙烯 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |