牌号简介 About |
---|
光滑铸造300系列液态塑料是超低粘度铸造树脂,生产的铸件是亮白色,几乎没有气泡。不需要真空脱气。它们提供体积为1A:1B或重量比为100A:90B的方便。它们之间的区别在于保质期和退场时间。这些树脂很容易接受填料(如从光滑开始的URE-FIL 3),并且可以并且可以用很强的颜色着色或点燃颜色(光滑铸造325系列比光滑铸造300系列更好地接受颜料)。完全固化的铸件坚韧、耐用、可加工和可涂漆。它们能抵抗潮湿和温和的溶剂。光滑铸造300系列液态塑料的应用包括复制中小型雕塑、制作原型模型、特效道具和装饰珠宝。有兴趣制作旋转铸造件的人员应参考光滑铸造旋转技术公告。 The Smooth-Cast® 300 Series of liquid plastics are ultra-low viscosity casting resins that yield castings that are bright white and virtually bubble free. Vacuum degassing is not necessary. They offer the convenience of a 1A:1B by volume or 100A:90B by weight mix ratio. The differences between them are pot life and demold time. These resins readily accept fillers (such as URE-FIL® 3 from Smooth-On) and can be colored with SO-Strong®, UVO® or Ignite® color tints (Smooth-Cast® 325 series accepts pigments better than the Smooth Cast® 300 series). Fully cured castings are tough, durable, machinable and paintable. They resist moisture and mild solvents. Applications for Smooth-Cast® 300 Series Liquid Plastics include reproducing small to medium size sculptures, making prototype models, special effect props and decorative jewelry. Those interested in making roto cast pieces should refer to the Smooth-Cast® 65D technical bulletin. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.05 | g/cm³ | ASTM D1475 |
特定体积 Specific volume |
0.954 | cm³/g | ASTM D1475 |
收缩率 Shrinkage rate |
|||
MD MD |
1.0 | % | ASTM D2566 |
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脱模时间 stripping time 2 |
|||
23℃ 23℃ 2 |
4.0 到 5.0 | min | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
混合比 Mixing ratio |
1A:1B by volume 100A:90B by weight | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩模量 Compression modulus |
MPa | ASTM D695 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
储存稳定性 storage stability |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Cure Time |
【新闻资讯】查看全部
热塑性聚酯弹性体TPEE、COPE性能简介
2020-11-03 搜料网资讯: 热塑性聚酯弹性体简称TPEE或COPE,是一类含有PBT(聚对苯二甲酸丁二醇酯)聚酯硬段(结晶相)和脂肪族聚酯或聚醚(非晶相)软段的线型嵌段共聚物。 TPEE属于高性能工程 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |