牌号简介 About |
---|
Prime Tuff-X 200是一种工程合金,填补工程塑料和高性能聚烯烃之间的空白。Prime Tuff-X 200具有非常低的C.L.T.E.,极好的冲击力,紫外线防护,并且具有高度的耐化学性。应用:汽车、电动工具、灌溉、电子、草坪、花园和房车应用的理想选择。加工:Prime Tuff-X 200是一种半晶体材料,与非晶材料相比,它在热成型过程中的行为有所不同。理想的成型条件;模具温度170-190°F,板材温度320-360°F,零件拆卸温度145-170°F。首选铝温控喷砂工具。陶瓷工具也可以很好地工作,如果它是玻璃珠爆破。使用Tuff-X时,最好使用石英或陶瓷加热器。有时可以使用Calrod加热器,但不建议使用燃气加热器。表面处理:Tuff-X 200可通过多种技术制造,如钻孔、布线、打孔、锯切、激光或模切。机械螺钉和其他类型的紧固件可用于将Tuff-X 200零件连接在一起。也可与某些类型的粘合剂粘合。请与Primex塑料公司代表联系,了解有关表面处理、制造或热成型工艺的更多信息。颜色、纹理和功能:我们的Tuff-x 200材料可以接受任何可能的颜色,此外,该产品可以用两部分的油漆系统进行喷漆。Tuff-X 200的规格为0.090至0.400英寸。宽度可达120“。Tuff-X 200有几种不同的型号,包括:FL/HC、H/C、菱形板、Smooth和Levant II。 Prime Tuff-X 200 is an engineered alloy that fills the gap between engineered plastics and high performance Polyolefins. Prime Tuff-X 200 has a very low C.L.T.E., excellent impact, UV protection and is highly chemical resistant. Applications: Ideal for ; automotive, power tools, irrigation, electronics, lawn and garden and RV applications. Processing: Prime Tuff-X 200 is a Semi-crystalline material that behaves differently in the thermoforming process when compared to an amorphous material. Ideal forming conditions; Mold temp. 170-190°F, Sheet temp. 320-360°F, part removal temp.145-170°F. Aluminum temperature controlled grit blasted tools are preferred. Ceramic tools can also work well if it is glass bead blasted. Quartz or ceramic heaters are preferred when working with Tuff-X. Calrod heaters can sometimes be used but gas fired is not recommended. Finishing: Tuff-X 200 can be fabricated by using many techniques such as; drilling, routing, punching, sawing, laser or die cut. Mechanical screws and other type of fasteners may be used to join Tuff-X 200 parts together. It may also be bonded with certain types of adhesives. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: Our Tuff-X 200 material will accept any color imaginable, furthermore, this product can be painted with a two part paint system. Tuff-X 200 is offered in gauges from .090 to .400 in. and in widths up to 120". Tuff-X 200 is offered in several different patterns that include; FL/HC, H/C, Diamond Plate, Smooth and Levant II. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.12 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
0.60 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
24.5 | MPa | ASTM D638 |
弯曲模量 Bending modulus |
2120 | MPa | ASTM D790 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256 | ||
-30℃ -30℃ |
64 | J/m | ASTM D256 |
23℃ 23℃ |
J/m | ASTM D256 | |
装有测量仪表的落镖冲击 Dart impact equipped with measuring instruments |
|||
-30℃ -30℃ |
J | ASTM D3763 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
> 1.50 mm > 1.50 mm |
UL 94 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
De(mold Temperature) De(mold Temperature) |
℃ | ||
模具温度 Mold temperature |
|||
other other |
℃ | ||
Sheet Temperature Sheet Temperature |
℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
研究结果表明,聚氨酯底马蹄铁可降低前腿超负荷的风险
2021-03-21 搜料网资讯: 研究发现表明,钢制马蹄铁的底部覆盖有柔软的聚氨酯,可能有助于减少马前腿的超负荷。 研究人员着手研究与传统钢鞋相比,其表面被软聚氨酯覆盖的钢鞋的表现如何。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |