物性表自定义
公司信息及水印
公司信息及水印
下载中文物性表
下载英文物性表
邮件发送/他人
牌号简介 About |
---|
应用:轴承衬套机械零件齿轮衬套 Applications: bearing bushes machine parts gears liners |
产品描述 Product Description
用途:轴承;衬里;衬套;齿轮;
加工条件:挤出 Extrusion
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.15 | g/cm³ | ISO 1183 |
吸水率 Water absorption rate |
ISO 62 | ||
23℃,24hr 23℃,24hr |
2.5 到 3.0 | % | ISO 62 |
饱和,23℃ Saturation, 23 ℃ |
7.5 到 9.0 | % | ISO 62 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
> 3.0 | kJ/m² | ISO 180 |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
无断裂 | ISO 180 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
熔融温度 Melting temperature |
|||
DSC DSC |
℃ | ISO 3146 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:20~100℃ MD:20~100℃ |
1/℃ | ISO 11359-2 | |
比热 specific heat |
J/kg/℃ | ASTM C351 | |
导热系数 Thermal conductivity coefficient |
W/m/K | ISO 8302 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | IEC 60093 | |
介电强度 Dielectric strength |
kV/mm | IEC 60243-1 | |
介电常数 Dielectric constant |
IEC 60250 | ||
耗散因数 Dissipation factor |
IEC 60250 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
球压硬度 Ball hardness |
MPa | ISO 2039-1 | |
拉伸模量 Tensile modulus |
MPa | ISO 527-2 | |
拉伸强度 tensile strength |
ISO 527-2 | ||
屈服 yield |
MPa | ISO 527-2 | |
断裂 fracture |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
摩擦系数 friction coefficient |
ASTM D1894 | ||
与钢 - 动态 Steel - Dynamic |
ASTM D1894 | ||
与钢 - 静态 Steel - Static |
ASTM D1894 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
海南将对各市县禁塑工作进行年度“期末考”
2020-10-21 搜料网资讯:10月19日,海南省生态环境厅印发了《海南省禁止生产销售和使用一次性不可降解塑料制品工作实施情况评估考核工作方案(试行)》(以下简称《方案》),《方案》明确 |