牌号简介 About |
---|
FRAGOM G XLC/900或是阻燃无卤聚烯烃热塑性化合物。FRAGOM G XLC/900或是一种柔性阻燃聚烯烃热塑性化合物,具有高温指数和良好的氧指数,适用于耐油电缆护套。研究辐射交联,通过30000次循环和萨多马索试验。 FRAGOM G XLC/900 OR is a flame retardant halogen free polyolefin thermoplastic compound. FRAGOM G XLC/900 OR is a flexible flame retardant polyolefin thermoplastic compound having high temperature index and good oxygen index, suitable for OIL RESISTANT cable sheathing. Study to Crosslinking by radiations, to pass 30,000 cycles and Sadomaso test. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.56 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,21.6kg 190℃,21.6kg |
8.0 | g/10min | ASTM D1238 |
老化性能 Aging performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度的变化率 The rate of change in tensile strength 3 |
|||
断裂时拉伸应力变化 Changes in tensile stress during fracture 3 |
|||
100℃,24 hr,在IRM 902油中 100 ℃, 24 hours, in IRM 902 oil 3 |
< 20 | % | IEC 60811 |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
极限氧指数 Extreme oxygen index |
ASTM D2863 | ||
-- -- 2 |
36 | % | ASTM D2863 |
-- -- 3 |
38 | % | ASTM D2863 |
Halogen Content Halogen Content |
% | IEC 60754-1 | |
温度指数 Temperature index 4 |
|||
燃烧 burning 4 |
℃ | NES 715 | |
烟气中的腐蚀性气体 Corrosive gases in flue gas |
|||
pH pH |
IEC 60754-2 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
IEC 60811 | ||
屈服 yield 2 |
MPa | IEC 60811 | |
屈服 yield 3 |
MPa | IEC 60811 | |
拉伸应变 Tensile strain |
IEC 60811 | ||
断裂 fracture 2 |
% | IEC 60811 | |
断裂 fracture 3 |
% | IEC 60811 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 After Crosslinking |
3 Before Crosslinking |
4 21% O2 |
【新闻资讯】查看全部
美银:最早2025年全球电动汽车电池可能断供
2021-07-21 搜料网资讯: 根据美银全球研究部门的一份最新研究报告,全球电动汽车行业面临一个迫在眉睫的威胁,其电池供应最早可能在2025年耗尽。 该报告称:我们更新的电动汽车电池供需模 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |