牌号简介 About |
---|
PULSE 630GF是13%玻璃纤维填充的 PC/ABS树脂, 颜色为标准黑. 其拥有很高的刚性,低的线性膨胀系数,优秀的加工性能,良好的发泡粘合性以及长期的热稳定性。这一材料良好的耐热性能使其满足大多数苛刻的车内光照以及温度条件。这一树脂也可以进行如冲压,运输,堆放等后处理 。加工过程中残留的边角料远低于玻纤填充的SMA材料。该材料是基于STYRON的本体ABS技术,使其具有很好的总碳排放以及极高的热稳定性。 PULSE 630GF 特别适合于需要覆皮的汽车仪表板以及空调出风口等。 PULSE™ 630GF is a 13% glass filled PC/ABS resin, available in standard black. It combines very high stiffness, low CLTE, excellent processability, good foam adhesion and long term heat stability. Its thermal resistance allows parts to meet the most severe sunload and temperature conditions in car interiors. The resin also allows for excellent post operations like stamping, transportation and stacking. Scrap generation during post processing is significantly below the levels obtained with glass filled SMA. To ensure low carbon emission characteristics and high thermal stability this product is based on the Company's unique mass ABS technology. PULSE™ 630GF is especially suitable for instrument panel retainers which are to be foamed, air ducts etc. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.17 | g/cm³ | ISO 1183/B |
表观密度 Apparent density |
0.68 | g/cm³ | ISO 60 |
熔体质量流动速率 Melt Flow Rate |
|||
260℃,5.0kg 260℃,5.0kg |
19 | g/10min | ISO 1133 |
收缩率 Shrinkage rate |
0.30 到 0.50 | % | ISO 294-4 |
VOC Content VOC Content |
10.0 | µg/g | VDA 277 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
MPa | ISO 527-1-2 | |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ISO 527-2/50 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2/50 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
ISO 179/1eA | ||
-30℃ -30℃ |
kJ/m² | ISO 179/1eA | |
23℃ 23℃ |
kJ/m² | ISO 179/1eA | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
维卡软化温度 Vicat Softening Temp |
℃ | ISO 306 2 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:-30~80℃ MD:-30~80℃ |
1/℃ | ISO 11359-2 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 50°C/h, B (50N) |
【新闻资讯】查看全部
赫斯基任命Stefano Mirti担任热流道及温控器业务部门总…
2016-01-20 赫斯基注塑系统有限公司今日宣布任命Stefano Mirti 担任热流道及温控器业务部门总裁一职,该任命自2016年1月1日起生效。Mirti自2015年6月以来一直担任热流道及温控器业务的临时负责人。 "我很高兴能由Stefano领导热流道及温控器业务团队",赫斯基总裁与首席执行官John Galt表示。"Stefano深刻了解客户需求并在各项业务中积极践行,从产品创新到销售和服务。他培养了强大而敬业的团队,致力于为客户创造价值以兑现我们的承诺。" Ste |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |