牌号简介 About |
---|
Eastar共聚酯DN001HF在保持优良力学性能的同时具有优异的流动性。它易于处理,可以填充复杂的工具。其最突出的特点是清晰度、韧性和耐化学性。本产品已通过绿色卫士室内空气质量认证。Greenguard室内空气质量认证标志是通过Greenguard环境研究所(GEI)许可使用的注册认证标志。GEI是一个行业独立的非盈利组织,负责监督Greenguard认证计划。Greenguard认证计划是一个行业独立的第三方测试计划,用于室内环境的低排放产品和材料。欲了解更多关于GEI的信息,并获得Eastman共聚酯的可打印证书,请访问www.greenguard.org。在制造商类别下选择Eastman Chemical Company,然后单击搜索以显示我们的产品列表。 Eastar™ Copolyester DN001HF has excellent flow characteristics while maintaining superior mechanical properties. It is easy to process and can fill intricate tools. Its most outstanding features are clarity, toughness and chemical resistance. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.23 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.30 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
0.15 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256 | ||
-40℃ -40℃ |
69 | J/m | ASTM D256 |
23℃ 23℃ |
No Break | ASTM D256 | |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D4218 | ||
-40℃ -40℃ |
ASTM D4218 | ||
23℃ 23℃ |
ASTM D4218 | ||
装有测量仪表的落镖冲击 Dart impact equipped with measuring instruments |
ASTM D3763 | ||
-40℃,Energy at Peak Load -40℃,Energy at Peak Load |
J | ASTM D3763 | |
23℃,Energy at Peak Load 23℃,Energy at Peak Load |
J | ASTM D3763 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 2 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
透光率 Transmittance |
|||
总计 total |
% | ASTM D1003 | |
雾度 Haze |
% | ASTM D1003 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂,23℃ Fracture, 23 ℃ |
MPa | ASTM D638 | |
屈服,23℃ Yield, 23 ℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
屈服,23℃ Yield, 23 ℃ |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
屈服,23℃ Yield, 23 ℃ |
MPa | ASTM D790 | |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 压 力1 (10N) |
【新闻资讯】查看全部
保守投资者要求取得三个科莱恩董事会席位
2017-10-31 White Tale Holdings上周五迫使科莱恩废除了其与亨斯迈之间进行的价值200亿美元的并购交易,要求获得三个科莱恩董事会席位,并由独立财务顾问对战略备选方案进行审查。White Tale是由对冲基金Corvex Management(纽约)和投资顾问40 North Management (纽约)创建的投资公司,据称其拥有科莱恩超过20%的股份。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |