牌号简介 About |
---|
Eltex® MMPE3940/10是一种用碳黑着色的母粒,由Eltex高密度聚乙烯基制成。主要用于UHT或灭菌乳包装用高密度聚乙烯共挤瓶中间层的着色。它符合主要的欧洲食品法规管理的食品包装,但它必须使用低于5%。 Eltex® MMPE3940/10 is a masterbatch pigmented with carbon black and manufactured from Eltex® high-density polyethylene base. It is mainly used for the pigmentation of the middle layer of high density polyethylene co-extruded bottles intended for the packaging of UHT or sterilized milk. It complies with the main European food regulations governing the packaging of food products however it must be used at less than 5%. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
炭黑含量 Carbon black content 2 |
40 | % | 内部方法 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Measured using weight before and after pyrolysis |
【新闻资讯】查看全部
国立科技生物可降解改性材料技术创新取得新突破
2021-10-14 搜料网资讯: 10月11日,国立科技在其官网上发布消息称,公司研发的竹粉全生物降解材料已顺利通过第三方检测中心检测认证。报告显示,该全生物可降解材料生物分解率为92.66%,相对 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |