牌号简介 About |
---|
汽车零件(电器元件等)耐热、阻燃电器零件继电器、微动开关、轻型电器线管、测量设备零件、密封装置的应用实例 Examples of application Automobile parts (Electrical components etc.) Heat-resistant, flame-resistant electrical parts Relays Microswitches Light electrical bobbins Measuring equipment parts Sealed devices |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.40 | g/cm³ | JIS K7112 |
表观密度 Apparent density |
2.30 | g/cm³ | |
收缩率 Shrinkage rate |
0.80 到 1.2 | % | JIS K6911 |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
0.30 到 0.50 | % | JIS K6911 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
4.4 到 5.9 | kJ/m² | JIS K7111 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ||
热变形温度 Hot deformation temperature |
℃ | JIS K7191-1 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | JIS K6911 | |
绝缘电阻 insulation resistance |
|||
沸腾后 After boiling |
ohms | ||
at ordinary state at ordinary state |
ohms | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
3.90 mm 3.90 mm |
UL 94 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Free Ammonia Free Ammonia |
% | JIS K7230 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
M 级 M-level |
JIS K6911 | ||
拉伸强度 tensile strength |
MPa | JIS K6911 | |
弯曲模量 Bending modulus |
MPa | JIS K7171 | |
弯曲强度 bending strength |
MPa | JIS K7171 | |
压缩强度 compressive strength |
MPa | JIS K6911 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
陶氏杜邦正式兼并,对行业有何影响?
2017-09-05 2017年8月31日,杜邦(DuPont)和陶氏(Dow)的股票在纽约证券交易所(NYSE)当天交易日结束时终止交易,标示着两家化学巨头的对等合并正式生效。合并后的公司将以陶氏杜邦(DowDuPo |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |