公司信息及水印
牌号简介 About |
---|
Amodel® LF-1950 HS是50%长的玻璃纤维增强,易于流动的PPA,可以在大多数注塑机上加工。该材料具有极高的机械和热性能,同时易于加工和快速循环。它在高温下具有高强度、刚度和冲击强度;优异的蠕变和疲劳抗力;各向同性的机械性能和减少的各向异性收缩;高剪切强度和高爆破压力;以及优良的表面光洁度。黑色:Amodel® LF-1950 HS BK545自然色:Amodel® LF-1950 HS NT Amodel® LF-1950 HS is 50% long glass fiber reinforced, easy-flowing PPA which can be processed on most injection molding machines. This material achieves extremely high mechanical and thermal properties, in combination with ease of processing and fast cycle times. It exhibits high strength, stiffness and impact strength at high temperatures; excellent creep and fatigue resistance; isotropic mechanical properties and reduced anisotropic shrinkage; high shear strength and high burst pressure; and an excellent surface finish. Black: Amodel® LF-1950 HS BK545 Natural: Amodel® LF-1950 HS NT |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.61 | g/cm³ | |
收缩率 Shrinkage rate |
0.25 | % | |
吸水率 Water absorption rate |
|||
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
0.80 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
18500 | MPa | |
90℃ 90℃ |
16500 | MPa | |
120℃ 120℃ |
MPa | ||
拉伸强度 tensile strength |
|||
断裂,23℃ Fracture, 23 ℃ |
MPa | ||
断裂,90℃ Fracture, 90 ℃ |
MPa | ||
断裂,120℃ Fracture, 120 ℃ |
MPa | ||
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ||
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ||
弯曲强度 bending strength |
MPa | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃ 23℃ |
kJ/m² | ||
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
23℃ 23℃ |
kJ/m² | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ||
导热系数 Thermal conductivity coefficient |
W/m/K | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
cm/cm/℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ||
介电强度 Dielectric strength |
kV/mm | ||
相比漏电起痕指数 Compared to the leakage tracing index |
V |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
PE:由茂名石化装置意外停车想到的......
2021-03-19 搜料网资讯: 3月15日11时50分许,茂名石化化工分部顺丁橡胶装置前工段碱洗塔突然着火。虽然聚乙烯装置未受影响,但茂名石化2#LDPE装置原计划于3月15日停车检修63天,由于此次装置故 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |