牌号简介 About |
---|
321F是以戊烷为发泡剂的普通级(标准级)可膨胀聚苯乙烯(EPS)。这一级别的开发是为了满足快速成型周期的要求,在真空机和传统的成型机。该等级特别适合EPS零件产品的制造商,宽度零件壁厚超过约10 mm。它也广泛用于生产绝缘板和面板,砌块成型或在连续成型机中生产。 321F is a regular grade (Standard grade) Expandable Polystyrene (EPS) containing pentane as blowing agent. This grade is developed to meet the demand for fast molding cycles in vacuum machine and conventional molding machines. This grade is particularly well suited for the manufacturer of EPS part products, width part wall thickness above approximately 10 mm. It is also widely use for production of insulation boards and panel, block molded or produced in continuous molding machines. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
K-Value K-Value |
55.5 到 57.5 | ||
模塑密度 Molded density |
16.0 到 25.0 | kg/m³ | |
含水量 water content |
< 0.20 | % | |
珠子直径 Bead diameter |
630.0 到 1120.0 | µm | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Blowing Agent(Pentane) Blowing Agent(Pentane) |
> 6.0 | wt% |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
思必拓独立研发出双层注塑机
2016-04-20 思必拓独立研发出双层注塑机,双层注塑机有两套锁模、两套射台,但是共用一套下架、模具以及机械手等等。 目前在中国,普遍使用的是单层的注塑机,很少会出现双层注塑机。双层注塑机能从整体上降低公司的经营成本,同时 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |