牌号简介 About |
---|
该系统具有结构塑料的刚度和典型双组分聚氨酯弹性体系统的可浇铸性。除了可浇铸外,Andurset® M-77D还比典型的热塑性塑料具有许多优点,包括低加工成本和铸造大截面和厚截面零件的能力。Andurset® M-77D,A部分含有二苯基甲烷二异氰酸酯(MDI),与A部分的Andurset T-80D相比,具有固有的安全性,后者含有有害成分甲苯二异氰酸酯。 This system features the rigidity of a structural plastic with the castability of a typical two-component polyurethane elastomer system. In addition to being castable, Andurset M-77D offers several advantages over typical thermoplastics which include low tooling cost and the ability to cast large and thick-section parts. The Andurset M-77D, Part A contains diphenylmethane diisocyanate (MDI) is inherently safer to work with than Andurset T-80D, Part A, that contains toluene diisocyanate which is a hazardous component. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.13 | g/cm³ | |
收缩率 Shrinkage rate |
|||
MD MD |
1.5 到 2.0 | % | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂 fracture |
41.4 | MPa | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
3.0 | % | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
20℃ 20℃ |
64 | J/m | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
℃ | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
重量混合比(PBW) Weight Mix Ratio (PBW) |
|||
Part A Part A |
|||
Part B Part B |
|||
粘度 viscosity |
|||
25℃ 25℃ 2 |
Pa·s | ||
25℃ 25℃ 3 |
Pa·s | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
|||
弯曲模量 Bending modulus |
MPa | ||
弯曲强度 bending strength |
MPa |
备注 |
---|
2、Part A |
3、Part B |
【新闻资讯】查看全部
塑料助剂的展开之路
2018-11-14 塑料助剂又叫塑料添加剂,是聚合物(合成树脂)进行成型加工时为改善其加工性能或为改善树脂本身性能不足而必须添加的一些化合物。例如,为了降低聚氯乙烯树脂的成型温度,使制品柔软而添加的增塑剂;又如为了制备质量轻、抗振、隔热、隔音的泡沫塑料而添加发泡剂;有些塑料的热分解温度与成型加工温度非常接近,不加入热稳定剂就无法成型。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |