牌号简介 About |
---|
BDT40EP是一种中等粘度的固化型含氟弹性体三元共聚物。该等级非常适用于流动性好、脱模性好、耐流体性能优于共聚物的场合。BDT40EP可以复合以满足主要的氟橡胶规格。BDT40EP可用于物品的挤压成型,也可用于油封和复杂几何形状的压缩成型。它可以使用典型的氟弹性体配合剂进行混合。混合可以通过两个辊磨机或内部搅拌机完成。制成品可采用多种橡胶加工方法生产。 BDT40EP is a medium viscosity curative incorporated fluoroelastomer terpolymer. This grade is well suited for application where good flowability, mold release and superior fluid resistance than copolymers are required. BDT40EP can be compounded to meet the major fluoroelastomer specifications. BDT40EP can be used for extrusion molding of articles, or compression molding of oil seals and complicated geometries. It can be mixed using typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.86 | g/cm³ | |
门尼粘度 Mooney viscosity |
|||
ML 1+10,121℃ ML 1+10,121℃ |
40 | MU | |
氟含量 Fluorine content |
68 | % | |
可溶性 solubility |
LMW Ketones and esters | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness 2 |
|||
邵氏 A Shaw's A 2 |
75 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服 yield 2 |
MPa | ASTM D412 | |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
% | ASTM D412 | |
压缩形变 Compression deformation |
|||
200℃,70 hr 200℃,70 hr |
% | ASTM D395B | |
MH(177℃) MH(177℃) 3 |
N·m | ||
ML(177℃) ML(177℃) 3 |
N·m | ||
t'90(177℃) t'90(177℃) 3 |
min | ||
ts2(177℃) ts2(177℃) 3 |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C |
3 MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes |
【新闻资讯】查看全部
一种复合资料的直升机部件采用3D打印的聚砜(PSU)模具制…
2017-12-11 在Thermwood Corporation公司、Applied Composite Engineering(简称“ACE”)公司、Techmer PM公司以及美国普渡大学复合材料制造与仿真中心的共同努力下,一种复合材料的直升机部件已在一幅3D打印的聚砜(PSU)模具中被生产出来。 采用Techmer PM公司提供的碳纤维增强材料,该模具在Thermwood公司的大型增材制造(简称“LSAM”)设备上被打印出来。利用该3D打 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |