牌号简介 About |
---|
德林是一种结晶塑料,它提供了一个良好的平衡性能,弥合金属和塑料之间的差距。Delrin具有很高的拉伸强度、抗蠕变和韧性。它还表现出低吸湿性。它对碳氢化合物、溶剂和中性化学物质具有化学抗性。这些特性及其疲劳耐久性使德尔林非常适合许多工业应用。Ensinger的Delrin 150原料形状是一种使用杜邦Delrin 150树脂制造的均聚物缩醛。这是一种结晶塑料,它提供了一个良好的平衡性能,以填补金属和塑料之间的差距。它具有较高的拉伸和弯曲性能,同时具有抗蠕变和韧性,同时具有较低的吸湿性和疲劳耐久性。 DELRIN® is a crystalline plastic which offers an excellent balance of properties that bridge the gap between metals and plastics. DELRIN® possesses high tensile strength, creep resistance and toughness. It also exhibits low moisture absorption. It is chemically resistant to hydrocarbons, solvents and neutral chemicals. These properties along with its fatigue endurance make DELRIN® ideal for many industrial applications. Ensinger manufactures homopolymer acetal stock shapes using DuPont's Delrin® 150 series acetal resin. It is a crystalline plastic which offers an excellent balance of properties to bridge the gap between metals and plastics. It possesses high tensile and flexural properties, along with creep resistance and toughness, while exhibiting low moisture absorption, and fatigue endurance. Good dimensional stability Low moisture absorption Excellent machinability High fatigue endurance High strength and stiffness properties Superior impact and creep resistance Chemical resistance to fuels and solvents Natural grade is made from resin that is FDA, NSF and USDA compliant Good wear and abrasion properties |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.42 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
ASTM D570 | ||
24hr 24hr |
0.25 | % | ASTM D570 |
饱和 saturated |
0.90 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
80 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
169 | ℃ | ASTM D648 |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
熔融温度 Melting temperature |
℃ | ASTM D2133 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
最高使用温度 Maximum operating temperature |
|||
Continuous Continuous |
℃ | UL 746B | |
Intermittent Intermittent |
℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant 3 |
|||
60 Hz 60 Hz 3 |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
60 Hz 60 Hz |
ASTM D150 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
限压速度 Pressure limiting speed |
psi·fpm | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
ASTM D785 | ||
M 级 M-level |
ASTM D785 | ||
R 级 R-level |
ASTM D785 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
摩擦系数 friction coefficient 2 |
|||
与自身 - 动态 With oneself - dynamic 2 |
|||
磨损因数 Wear factor |
10^-8 mm³/N·m | ASTM D3702 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 40 psi, 50 fpm |
3 50% RH |
【新闻资讯】查看全部
巴斯夫将首次在CHINAPLAS展出一系列医疗用品
2021-06-20 搜料网资讯: 巴斯夫将首次在CHINAPLAS国际橡塑展上展出一系列采用巴斯夫材料的医疗用品,提高患者安全性和舒适性。 Hexamoll DINCH增塑剂生产的一次性医用手套:该产品采用了专为人体 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |