牌号简介 About |
---|
Altuglas-Luctor是一种冲击改性丙烯酸树脂,适用于注塑和挤出。它的设计是为了提供出色的耐化学性,非常适合静脉注射和其他医疗设备,在这些设备中,对酒精、脂类乳剂、TPN溶液或新一代肿瘤药物的最大耐受性是至关重要的。Altuglas-Luctor的一些特点和优点是:耐化学性、对脂质和药物配方的突出抵抗力、对异丙醇(IPA)的优越抵抗力、暴露于医院防腐剂后的性能保持力、对伽马辐射、电子束和ETO稳定的酸和碱灭菌、以及具有良好颜色的快速恢复。稳定性保持透明性和透明度保持机械性能加工性优异的熔融加工性缩短了适用于薄壁应用和复杂多腔模具的循环时间使用溶剂、超声波或射频方法的良好粘合性生物友好含有超过25%的生物可再生碳含量 Altuglas® Luctor™ is an impact-modified acrylic resin suitable for injection molding and extrusion. It is designed to provide outstanding chemical resistance and is well suited for intravenous and other medical devices where maximum resistance to alcohol, lipid emulsions, TPN solutions or new generation oncology drugs is paramount. Some of the features and benefits of Altuglas® Luctor™ are: Chemical Resistance Outstanding resistance to lipids and drug formulations Superior resistance to isopropyl alcohol (IPA) Property retention after exposure to hospital antiseptics, acids and bases Sterilization Stable to gamma radiation, E-beam, and ETO Rapid recovery with very good color stability Retention of transparency and clarity Retention of mechanical properties Processability Excellent melt processability Reduced cycle times Suitable for thin-wall applications and complex multi-cavity molds Good bondability using solvent, ultrasonic, or radio frequency methods Biofriendly Contains more than 25% bio-renewable carbon content |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.18 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,3.80kg 230℃,3.80kg |
6.5 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate |
|||
MD MD |
0.20 到 0.60 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.40 | % | ASTM D570 |
生物质含量 Biomass content |
|||
Carbon Carbon |
25 | % | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,退火 0.45 MPa, annealed |
℃ | ASTM D648 | |
1.8 MPa,退火 1.8 MPa, annealed |
℃ | ASTM D648 | |
维卡软化温度 Vicat Softening Temp |
|||
-- -- |
℃ | ASTM D1525 2 | |
-- -- |
℃ | ASTM D1525 3 | |
导热系数 Thermal conductivity coefficient |
W/m/K | ASTM C177 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
折射率 Refractive index |
ASTM D542 | ||
透光率 Transmittance |
|||
3180 µm 3180 µm |
% | ASTM D1003 | |
雾度 Haze |
|||
3180 µm 3180 µm |
% | ASTM D1003 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
ASTM Classification ASTM Classification |
ASTM D788 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
M 级 M-level |
ASTM D785 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
屈服 yield |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 速率 A (50°C/h), 压 力1 (10N) |
3 速率 A (50°C/h), 载荷2 (50N) |
4 ND @ 72°F |
【新闻资讯】查看全部
以史为鉴 勇毅前行
2022-02-19 我学习党的十九届六中全会精神的一个深刻体会是:要把党的历史经验作为想问题、作决策、办事情的重要遵循,要善于从历史经验中增强赢得主动的定力、魄力、能力,要切实把思想 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |