牌号简介 About |
---|
聚酰胺66,未填充材料,注塑用黑色颜料 Common Features of Tufnyl® Polyamide (Nylon) resin include excellent mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical properties, abrasion and chemical resistance. Nylon 66 Glass Filled material for Injection Molding. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.14 | g/cm³ | ISO 1183 |
收缩率 Shrinkage rate |
ISO 294-4 | ||
TD TD |
1.7 到 2.0 | % | ISO 294-4 |
MD MD |
1.6 到 1.9 | % | ISO 294-4 |
含水量 water content |
< 0.20 | % | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
4.5 | kJ/m² | ISO 180 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
熔融温度 Melting temperature |
℃ | ISO 11357-3 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ASTM D257 | |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
ISO 2039-2 | ||
M 级 M-level |
ISO 2039-2 | ||
R 级 R-level |
ISO 2039-2 | ||
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
欧洲回收塑料需求未受石油价钱下降影响
2016-03-22 据行业组织机构PRE称,去年原油市场的衰落导致了石油价格的下降,但是并没有影响欧洲对回收塑料的需求。 但是由于低油价使得聚合物价格具有向下的趋势,对塑料回收市场将造成一定的困难。 PRE表示,这种情况并不能反应对欧洲塑料回收市场的概况,只针对某些接触塑料制品出口的公司。 PRE总裁Ton Emans称主要有两个因素支持着欧洲塑料回收业的需求。第一,中国已经发布了一些减少塑料垃圾的政策,第二欧洲回收商生产的优质回收塑料具有稳定的销售出路。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |