牌号简介 About |
---|
PC/ABS合金中耐热性高,流动力学性能好,吸湿性低,尺寸稳定性好。菲亚特CR 110.500-福特TL 522 31(B型):所有颜色,紫外线稳定(L)。 PC/ABS alloy medium-high thermal resistance, good flow and mechanical properties, low moisture absorption and good dimensional stability. FIAT CR 110.500 - FORD TL 522 31 (Type B) Available: all colors, UV stabilized (L). |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.13 到 1.15 | g/cm³ | ASTM D792 , ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
260℃,5.0kg 260℃,5.0kg |
12 | g/10min | ASTM D1238,ISO 1133 |
收缩率 Shrinkage rate |
ASTM D955 | ||
MD MD |
0.40 到 0.70 | % | ASTM D955 |
TD TD |
0.40 到 0.70 | % | ASTM D955 |
吸水率 Water absorption rate |
ASTM D570 , ISO 62 | ||
23℃,24hr 23℃,24hr |
0.20 | % | ASTM D570,ISO 62 |
饱和,23℃ Saturation, 23 ℃ |
% | ASTM D570,ISO 62 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
MPa | ASTM D638 , ISO 527-2 | |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 , ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 , ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 , ISO 178 | |
弯曲强度 bending strength |
|||
-- -- |
MPa | ISO 178 | |
断裂 fracture |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength 2 |
|||
23℃ 23℃ 2 |
kJ/m² | ASTM D256,ISO 179 | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength 2 |
|||
23℃ 23℃ 2 |
ISO 179 , ASTM D256 | ||
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,3.2mm 23℃,3.2mm |
J/m | ASTM D256,ISO 180 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648,ISO 75-2/A | |
连续使用温度 Continuous use temperature 3 |
℃ | IEC 60216 | |
维卡软化温度 Vicat Softening Temp |
|||
A50 A50 |
℃ | ASTM D1525,ISO 306 | |
B50 B50 |
℃ | ASTM D1525 5 , ISO 306/B50 5 | |
球压测试 Ball pressure test |
|||
125℃ 125℃ |
VDE 0470 | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:-30~30℃ MD:-30~30℃ |
1/℃ | ASTM D696 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
|||
2 mm 2 mm |
kV/mm | ASTM D149 | |
相比漏电起痕指数 Compared to the leakage tracing index |
|||
解决方案 A Solution A |
V | IEC 60112 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
1.60 mm 1.60 mm |
UL 94 | ||
燃烧速率 Burning rate |
mm/min | FMVSS 302 | |
极限氧指数 Extreme oxygen index |
% | ASTM D2863 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 6x4x50 mm |
3 20000 hrs |
4 速率 A (50°C/h), 压 力1 (10N) |
5 速率 A (50°C/h), 载荷2 (50N) |
【新闻资讯】查看全部
同德科创PBAT新材料产业链一体化项目设计开工
2021-07-18 搜料网资讯: 近日,同德科创材料有限公司PBAT新材料产业链一体化项目设计开工会在山西忻州同德化工股份有限公司总部顺利召开。同德科创材料有限公司总经理邬庆文,苏美达-聚友 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |