牌号简介 About |
---|
CONAPOXY® AD-10是一种独特的单组分环氧树脂,可用作结构粘合剂或微型电子封装化合物。热固化配方设计用于在低至93°C(200°F)的温度下快速固化,但在室温下具有良好的储存寿命。良好的介电性能和热稳定性使该环氧树脂非常适合150°C(302°F)以下的电气应用。这种单组分环氧树脂可用于与大多数金属、陶瓷和塑料粘合,并且在化学上耐多种酸和碱。具体应用包括粘合和/或密封磁铁和扬声器组件、电池、过滤器、端盖填充、结构材料、微型封装和铆合。CONAPOXY® AD-10通常用作粘合剂,厚度不得超过1/8“。这种环氧树脂消除了混合双组分系统时人为错误的可能性。通过使用CONAPOXY® AD-10,制造商将节省时间,确保质量,减少废料。 CONAPOXY AD-10 is a unique single-component epoxy that may be used as a structural adhesive or miniature electronic potting compound. The heat-cure formulation was designed for rapid cure at temperatures as low as 93°C (200°F), yet it exhibits good storage life at room temperature. Good dielectric properties and thermal stability make this epoxy ideal for electrical applications up to 150°C (302°F). This single-component epoxy may be used to bond to most metals, ceramics, and plastics and it is chemically resistant to many acids and bases. Specific applications include bonding and/or sealing magnet and speaker assemblies, batteries, filters, end cap filling, structural materials, miniature potting and staking. CONAPOXY AD-10 is typically used as an adhesive and should not be used in excess of 1/8 " thickness. This epoxy eliminates the possibility of human error when mixing two-component systems. By using CONAPOXY AD-10 the manufacturer will save time, ensure quality and reduce scrap. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.27 | g/cm³ | |
固体含量 Solid content |
100 | % | |
粘度 viscosity |
|||
25℃ 25℃ |
Thixotropic Non-Flow | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
> 15 | kV/mm | |
介电常数 Dielectric constant |
|||
25 ℃,1 kHz 25 ℃,1 kHz |
4.00 | ||
耗散因数 Dissipation factor |
|||
25℃,1 kHz 25℃,1 kHz |
|||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
贮藏期限 Storage period |
|||
5℃ 5℃ |
wk | ||
25℃ 25℃ |
wk | ||
脱模时间 stripping time |
|||
93℃ 93℃ |
min | ||
107℃ 107℃ |
min | ||
121℃ 121℃ |
min | ||
135℃ 135℃ |
min | ||
149℃ 149℃ |
min | ||
162℃ 162℃ |
min | ||
204℃ 204℃ |
min | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
工作温度 working temperature |
℃ | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
搭接剪切强度 lap shear strength 2 |
MPa |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 AL/AL |
【新闻资讯】查看全部
武汉石化聚丙烯优化挖潜增效明显
2018-01-05 2017年,武汉石化聚丙烯车间狠抓优化生产和节能管理,挖潜增效显著。 2017年,为增强市场竞争力,武汉石化聚丙烯车间不断优化格栅料专用料生产,改进并缩短产品牌号转换时间,减少过渡料的产生。全年生产格栅料2772.4吨,按每吨格栅料加价500元计算,累计创效208.94万元。该车间同时狠抓高负荷平稳生产,严格执行班组稳产奖励措施,全年累计加工乙烯来丙烯7110吨,按每加工1吨创效1000元计算,增效711万元。 该车间加强丙烯精制系统管理,定期对精制塔进行换 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |