牌号简介 About |
---|
20-3001 NC是一种低粘度、未填充的环氧灌封和封装系统,固化后形成无气泡玻璃状表面。这是一个100%固体树脂系统,不含任何溶剂。它方便的1:1配合比和填料的缺乏使其成为计量混合和分配设备的理想材料。20-3001 NC已制定,以便于处理。它的低粘度有助于填充空隙和气穴。此外,该系统没有填料沉降。20-3001 NC是原20-3001产品的非结晶版本。 20-3001 NC is a low viscosity, unfilled epoxy potting and encapsulating system which forms a bubble free glass like finish when cured. This is a 100% solids resin system that does not contain any solvents. Its convenient 1:1 mix ratio and lack of fillers make it an ideal material for meter mix and dispense equipment. 20-3001 NC has been formulated for ease in handling. Its low viscosity aids in filling voids and air pockets. In addition, there is no filler settling with this system. 20-3001 NC is the non-crystallizing version of the original 20-3001 product. |
技术参数 Technical Data | |||
---|---|---|---|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
5.0E-5 | 1/℃ | |
导热系数 Thermal conductivity coefficient |
0.43 | W/m/K | |
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
25℃ 25℃ |
1000 | cP | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
工作温度 working temperature |
-50.0 到 150 | ℃ | |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
Black Clear/Transparent | ||
重量混合比(PBW) Weight Mix Ratio (PBW) |
|||
Part A Part A |
|||
Part B Part B |
|||
体积混合比(PBV) Volume Mixing Ratio (PBV) |
|||
Part A Part A |
|||
Part B Part B |
|||
密度 Density |
|||
25℃ 25℃ |
g/cm³ | ||
固化时间 Curing time |
|||
23℃ 23℃ |
hr | ||
储存稳定性 storage stability 2 |
|||
25 ℃ 25 ℃ 2 |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
|||
拉伸强度 tensile strength |
MPa | ||
耐电强度 Electrical strength |
kV/mm | ||
相对电容率 Relative permittivity |
|||
60 Hz 60 Hz |
|||
体积电阻率 Volume resistivity |
ohms·cm | ||
耗散因数 Dissipation factor |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 100 grams |
【新闻资讯】查看全部
上海石化试消费己烯共聚产品
2017-04-25 日前,上海石化以己烯为共聚单体,试生产出高密度双峰聚乙烯管材料,进一步巩固了该公司在国内聚乙烯管材专用料产品中的领先地位。 据了解,相比于以1-丁烯为共聚单体,使用1-己烯为共聚单体生产出的共聚树脂,性能更加优异,主要表现为具有更好的拉伸强度、耐快速和慢速开裂性、抗冲击性等。作为性能良好的管材料,它在大口径给水管道、高端燃气管道等领域有着广泛应用,国外生产厂家也趋向于使用1-己烯生产高档聚乙烯产品。 上海石化是国内生产聚乙烯管材料的标杆企业,其采用北欧化工双 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |