牌号简介 About |
---|
PPC50-1.6NA是一种高熔体流动性、中等冲击性的聚丙烯共聚物树脂,专为需要良好平衡性能和更快循环能力的注塑应用而设计。PPC50-1.6NA的建议用途包括家庭用品。Osterlene® PPC50-1.6NA符合食品药品监督管理局21 CFR第177.1520节的要求。本法规允许在“…与食品接触的物品或成分中使用该烯烃聚合物。”具体限制可能适用。有关更多信息,请联系您的Osterman销售代表。 PPC50-1.6NA is a very high melt flow, medium impact polypropylene copolymer resin, designed for injection molding applications requiring a good balance of properties with faster cycling capability. Suggested uses for PPC50-1.6NA include housewares. Osterlene PPC50-1.6NA meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
50 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服 yield 2 |
24.1 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
屈服 yield |
6.0 | % | ASTM D638 |
弯曲模量 Bending modulus 3 |
|||
1% 正割 1% secant 3 |
1240 | MPa | ASTM D790-A |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256-A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
3 0.039 in/min |
【新闻资讯】查看全部
盛禧奥在台湾新竹启动新的TPE试验设施
2020-12-07 搜料网资讯: 盛禧奥(Trinseo)宣布在台湾新竹的热塑性弹性体(TPE)试验设施举行落成典礼。该设施是盛禧奥 TPE 增长策略的重要一步,能够在本地生产定制的 TPE 和热塑性聚氨酯(TPU),以其 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |