牌号简介 About |
---|
50-3182 NC是一种高填充环氧树脂系统,具有优异的物理、电气和热性能。50-3182数控提供非常高的导热性,良好的电气绝缘和低热膨胀。这种独特的性能组合使该系统非常适合在传热时必须保持电气绝缘和机械保护的应用。应用:50-3182数控是理想的高压应用,如电源,变压器,高压绝缘体,套管等。 50-3182 NC is a highly filled epoxy system with excellent physical, electrical, and thermal properties. 50-3182 NC offers very high thermal conductivity, excellent electrical insulation, and low thermal expansion. This unique combination of properties makes this system ideal for applications where electrical insulation and mechanical protection must be maintained while transferring heat. Applications: 50-3182 NC is ideal for high voltage applications such as power supplies, transformers, high voltage insulators, bushings, etc... |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
收缩率 Shrinkage rate |
|||
MD MD |
0.10 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
弯曲强度 bending strength |
93.1 | MPa | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
19 | J/m | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
3.0E-5 | 1/℃ | |
导热系数 Thermal conductivity coefficient |
1.7 | W/m/K | |
热变形温度 Hot deformation temperature |
℃ | ||
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
25℃ 25℃ |
cP | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
工作温度 working temperature |
℃ | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
重量混合比(PBW) Weight Mix Ratio (PBW) |
|||
Part A Part A |
|||
Part B Part B |
|||
密度 Density 2 |
|||
25℃ 25℃ 2 |
g/cm³ | ||
固化时间 Curing time |
|||
66℃ 66℃ |
hr | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
吸水率 Water absorption rate 3 |
% | ||
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
|||
拉伸模量 Tensile modulus |
MPa | ||
拉伸强度 tensile strength |
MPa | ||
压缩强度 compressive strength |
MPa | ||
耐电强度 Electrical strength |
kV/mm | ||
相对电容率 Relative permittivity |
|||
60 Hz 60 Hz |
|||
体积电阻率 Volume resistivity |
ohms·cm | ||
耗散因数 Dissipation factor |
|||
60 Hz 60 Hz |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Mixed |
3 After 7 days |
【新闻资讯】查看全部
由环保整治引发的塑料制品行业思索及聚乙烯需求展望
2017-08-24 2017年可谓是最严环保年,对于老百姓而言,生活环境和空气质量的提升是值得期待的。但对于行业人士而言,目前的状态还是有些许的凄凉,其朋友圈也多在转发各种环保增加失业率,因环保鸡蛋价格上涨等诸如此类的文章。 对于此事隆众与塑料制品行业人士也多次交流,了解到今年环保确实力度较大,对于企业影响明显,不管是基建、环保证件的健全还是环保设备的增加,均在一定程度上影响了企业的生产。冷静思考之下,最严环保将对于制品行业进行洗牌,甚至长远来看会导致行业两级分化。 就从聚乙烯 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |