牌号简介 About |
---|
Lubmer是由Mitusi Chemicals的原始聚合技术开发的一种特殊的聚乙烯。润滑油具有优异的滑动性能、耐磨性和可塑性。尤其是在办公自动化设备、汽车、电气和电子部件的隔音部件上,lubmer被广泛应用。此外,鲁布默还为建筑材料、机械零件等的发展做出了重大贡献。作为一种能创造未来的高性能材料引起人们的关注。特点:滑动性能食品安全耐磨耐化学性电绝缘性能无噪音性能应用:电气/办公自动化设备零件汽车零件通用设备零件建筑材料等零件 LUBMER is a specially polyethylene developed by Mitusi Chemicals' original polymerization technology. LUBMER has outstanding sliding properties, abrasion resistance and moldability. Especially, LUBMER is used for a wide range of applications for soundproofing parts of office automation equipments, automotive, electrical and electronic parts. In addition, LUBMER is making a significant contribution to the development of building materials, mechanical parts, etc.. attracting attention as a high-performance material that will build a future. Features: Sliding properties Food Safety Abrasion resistance Chemical resistance Electrical insulating properties Noiseless properties Applications: Electrical/office automation equipment parts Automotive parts General equipment parts, building materials, and other parts |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.111 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,10.0kg 190℃,10.0kg |
7.0 | g/10min | JIS K7210 |
螺旋流动长度 Spiral flow length 2 |
33.0 | cm | 内部方法 |
收缩率 Shrinkage rate |
内部方法 | ||
MD:2.0 mm MD:2.0 mm |
1.5 | % | 内部方法 |
TD:2.0 mm TD:2.0 mm |
1.3 | % | 内部方法 |
吸水率 Water absorption rate |
|||
24hr 24hr |
% | ASTM D570 | |
PV Limit PV Limit 3 |
MPa·m/s | 内部方法 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,2mm 23℃,2mm |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 6 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
|||
23℃ 23℃ |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
1 MHz 1 MHz |
ASTM D150 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Heat Generation Temperature Heat Generation Temperature 3 |
℃ | 内部方法 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 tensile strength 4 |
|||
断裂,23℃ Fracture, 23 ℃ 4 |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 4 |
|||
断裂,23℃ Fracture, 23 ℃ 4 |
% | ASTM D638 | |
弯曲模量 Bending modulus 5 |
|||
23℃,3 mm,48 mm跨距 23 ℃, 3 mm, 48 mm span 5 |
MPa | ASTM D790 | |
弯曲强度 bending strength 5 |
|||
23℃,3 mm,48 mm跨度 23 ℃, 3 mm, 48 mm span 5 |
MPa | ASTM D790 | |
摩擦系数 friction coefficient 3 |
|||
动态 dynamic 3 |
内部方法 | ||
磨损量 Wear amount 3 |
10^-8 mm³/N·m | 内部方法 |
备注 |
---|
2 熔体温度: 270°C |
3 SUS 304 (surface roughness, 6S) |
4 类型 4, 50 mm/min |
5 5.0 mm/min |
6 压 力1 (10N) |
【新闻资讯】查看全部
动力煤:供需两端均有支撑 煤价或将偏强运行
2021-05-01 搜料网资讯: 【导语】港口煤价经上周后半段短暂下行后,随国内煤炭安全检查力度升级,供应端增量空间有限,市场预期发生转变,港口煤价再次出现向上攀升迹象。 据卓创资讯监测 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |