牌号简介 About |
---|
聚丙烯均聚物,20%矿物填料增强,低熔体流动速率。ISPLENPM240 AT具有高刚度、低翘曲和收缩性能。该产品具有高热稳定性。典型应用汽车:发动机罩下的零件承受高热应力(轻型外壳、加热和通风管道)。车内空调元件 Polypropylene homopolymer, 20% mineral fillers reinforced and low melt flow rate. ISPLEN PM240 AT gives a high stiffness, and a low warpage and shrinkage behaviour. The product is high heat stabilised. TYPICAL APPLICATIONS Automotive: Under the bonnet parts subjected to high thermal stress (Light housings, heat and ventilation ducts). Air conditioning elements inside the car |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.04 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
3.0 | g/10min | ISO 1133 |
收缩率 Shrinkage rate 2 |
0.90 to 1.5 | % | ISO 2577 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,15 秒 Shore D, 15 seconds |
76 | ISO 868 | |
拉伸强度 tensile strength |
|||
屈服 yield |
35.0 | MPa | ISO 527-2 |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ISO 180 | ||
0℃ 0℃ |
kJ/m² | ISO 180 | |
23℃ 23℃ |
kJ/m² | ISO 180 | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
ISO 180 | ||
0℃ 0℃ |
kJ/m² | ISO 180 | |
23℃ 23℃ |
kJ/m² | ISO 180 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
维卡软化温度 Vicat Softening Temp |
|||
-- -- |
℃ | ISO 306/A120 | |
B120 B120 |
℃ | ISO 306/B120 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 150x100x3mm |
【新闻资讯】查看全部
优化后的巴斯夫TPU是制造鞋支撑片的理想选择
2018-08-08 优化后的巴斯夫热塑性聚氨酯弹性体(TPU)具备卓越的机械性能,是制造鞋支撑片的理想选择 创新材料技术帮助提高鞋履装饰部件的设计自由度 高能效TPU品级最大可将生产周期缩短30 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |