牌号简介 About |
---|
35熔体流动均聚物尖峰聚合物聚丙烯1635AF是采用Unipol-PP技术,采用气相流化床反应器和高活性催化剂系统,以确保统一的物理性能和批次一致性。本产品用于注塑成型;流动性能在生产薄壁制品时应特别有利。它不含成核剂、抗静电剂或动物衍生物。潜在的应用包括:医疗/医疗包装、实验室用品、容器和一般的薄壁物品。1635AF亮点:热灭菌(可高压消毒)不含动物衍生物,颜色优良,加工稳定性低,由Pinnacle聚合物公司销售的Pinnacle's聚丙烯,天然、未着色颗粒形式,符合CFR标题21第177部分B子部分第177.1520(c)1.1a节的适当要求。题为“烯烃聚合物”的食品添加剂修正案1958年美国食品,药品和化妆品法案1938年。 35 MELT FLOW HOMOPOLYMER Pinnacle Polymers Polypropylene 1635AF is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency. This product is intended for injection molding; the flow properties should be of particular benefit in the production of thin-walled articles. It contains no nucleators, antistats or animal derivatives. Potential applications include: healthcare/medical packaging, labware, containers and thin-wall articles in general. The 1635AF highlights: Heat Sterilizable (autoclavable) Contains no animal derivatives Excellent color and processing stability Low Extractables Pinnacle's polypropylene, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
35 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 2 |
34.5 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 2 |
10 | % | ASTM D638 |
弯曲模量 Bending modulus 3 |
|||
1% 正割,3.20 mm,注塑成型 1% cut, 3.20 mm, injection molded 3 |
1550 | MPa | ASTM D790-A |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch 4 |
|||
23℃,3.2mm,注塑成型 23 ℃, 3.2mm, injection molding 4 |
J/m | ASTM D256 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 1, 2.0 in/min |
3 类型 1, 0.050 in/min |
4 Type I |
【新闻资讯】查看全部
塑料机械注塑机液压零碎在使用时要留意什么?
2017-10-17 1 使用者应明白塑料机械注塑机液压系统的工作原理,熟悉各种操作和调整手柄的位置及旋向等。 2 开车前应检查系统上各调整手柄、手轮是否被无关人员动过,电气开关和行程开关的位 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |