牌号简介 About |
---|
Hetron FR992树脂是一种低粘度、未经加工、阻燃的)专利环氧乙烯基酯,采用F-CAT技术。这项专利技术的结果是一种树脂,显示出没有泡沫,良好的放热控制和业界领先的存储稳定性。当添加3%三氧化二锑且火焰蔓延小于75(不含三氧化二锑)时,用Hetron FR992树脂制成的层压板的火焰蔓延小于25(ASTM E-84)。Hetron FR992树脂为最终产品提供:优异的阻燃性、高强度特性、优异的冲击强度和韧性、快速浸湿和低排水性、优异的耐酸碱环境腐蚀性应用和使用Hetron FR992树脂可用于耐腐蚀、增强的热固塑料。包括纤维缠绕、手工铺层和喷淋罐的设备、管道、管道、堆垛、洗涤器、衬里或其它处理需要高阻燃性的腐蚀性气体、蒸气或液体的设备。 HETRON FR992 resin is a low viscosity, unpromoted, flame retardant") patented epoxy vinyl ester with F-Cat technology. This patented technology results in a resin that exhibits no foaming, excellent exotherm control, and industry-leading storage stability. Laminates made with HETRON FR992 resin have achieved a flame spread of <25 (ASTM E-84) when 3% antimony trioxide is added and a flame spread of <75 without antimony trioxide. HETRON FR992 resin gives final products with: Excellent flame retardancy High strength characteristics Excellent impact strength and toughness Fast wet-out and low drainage Excellent corrosion resistance to acidic and alkaline environments APPLICATIONS AND USE HETRON FR992 resin can be used for corrosion resistant, reinforced thermosetting plastic equipment including filament wound, hand lay-up and spray-up tanks, pipes, ducts, stacks, scrubbers, linings or other equipment handling corrosive gases, vapors or liquids where a high degree of flame retardancy is required. |
产品描述 Product Description
用途:衬里;层压板;水箱;管道系统;
加工条件:灯丝电源绕组
性能特点: 耐腐蚀; 机械强度好; 耐酸; 阻燃; 低粘度; 冲击性能好; 韧性好; 耐碱; Good Rigidity,Good flexibility,Alkali resistant,High impact resistance,Low Viscosity,Corrosion Resistant,Flame Characteristics,Acidproof
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
溶液粘度 Solution viscosity 2 |
425 | mPa·s | |
Gardner 颜色 Gardner color |
< 5.00 | ||
固体含量 Solid content |
58 | % | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
108 | ℃ | ASTM D648 |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
放热峰值 exothermic peak |
193 | ℃ | |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
胶凝时间 Gelation time |
min | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
巴氏硬度 Babbitt hardness |
ASTM D2583 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
ASTM D638 | ||
屈服 yield |
% | ASTM D638 | |
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Brookfield #2 spindle @ 30 rpm |
【新闻资讯】查看全部
2021年1季度中国大陆塑料机械进出口概况
2021-05-20 搜料网资讯: 根据海关总署统计数据,2021年1季度中国大陆塑料机械进出口总额为13.44亿美元,同比增长42.56%;其中,进口额4.87亿美元,同比增长22.63%,出口额8.57亿美元,同比增长57. |