牌号简介 About |
---|
特殊的低光泽级注塑成型,结合了中等耐热性和良好的刚度和韧性之间的平衡。名称:热塑性ISO 2580-abs 1,MG,105-04-16-20该等级的主要应用是汽车内饰,例如仪表板仪表和面板,其中亚光表面光洁度和高耐热性是非常理想的。选择这种材料,当在具有适当质量光洁度的工具中进行适当加工时,可能意味着取消后续的喷漆操作,从而降低零件成本,并更容易回收利用。Sinkral® C 333/M2可提供改进的抗紫外线能力(/u)。 Special low gloss grade for injection molding which combines medium heat resistance with a good balance between stiffness and toughness. Designation: Thermoplastic ISO 2580-ABS 1,MG,105-04-16-20 Main application for this grade is automotive interiors, for example dashboard instruments and panels, where a matt surface finish and high thermal resistance are highly desirable. The choice of this material, when properly processed in tools having a suitable quality finish, can mean the elimination of subsequent painting operations with a consequent reduction in part costs together with easier recycling. Sinkral C 333/M2 can be supplied with improved UV resistance (/U). |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.04 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
220℃,10.0kg 220℃,10.0kg |
5.0 | g/10min | ISO 1133 |
收缩率 Shrinkage rate |
0.40 到 0.60 | % | 内部方法 |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
0.30 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃ 23℃ |
12 | kJ/m² | DIN 53453 |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
DIN 53453 | ||
-40℃ -40℃ |
DIN 53453 | ||
23℃ 23℃ |
DIN 53453 | ||
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
-40℃,3.2mm -40℃,3.2mm |
J/m | ISO 180-4A | |
-20℃,3.2mm -20℃,3.2mm |
J/m | ISO 180-4A | |
0℃,3.2mm 0℃,3.2mm |
J/m | ISO 180-4A | |
23℃,3.2mm 23℃,3.2mm |
J/m | ISO 180-4A | |
-40℃ -40℃ 4 |
kJ/m² | ISO 180-1A | |
23℃ 23℃ 4 |
kJ/m² | ISO 180-1A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,退火 1.8 MPa, annealed |
℃ | ASTM D648 | |
维卡软化温度 Vicat Softening Temp |
|||
-- -- |
℃ | ISO 306/A120 | |
B120 B120 |
℃ | ISO 306/B120 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
导热系数 Thermal conductivity coefficient |
W/m/K | ASTM C177 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | IEC 60093 | |
体积电阻率 Volume resistivity |
ohms·cm | IEC 60093 | |
介电强度 Dielectric strength |
kV/mm | IEC 60243-1 | |
介电常数 Dielectric constant |
|||
1 kHz 1 kHz |
IEC 60250 | ||
耗散因数 Dissipation factor |
|||
1 kHz 1 kHz |
IEC 60250 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
1.50 mm 1.50 mm |
UL 94 | ||
灼热丝起燃温度 Igniting temperature of the hot wire |
|||
3 mm 3 mm |
℃ | IEC 60695-2-13 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Designation Designation |
|||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ISO 2039-2 | ||
拉伸强度 tensile strength 2 |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
% | ASTM D638 | |
弯曲模量 Bending modulus 3 |
MPa | ASTM D790 | |
弯曲强度 bending strength 3 |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
3 0.079 in/min |
4 4 mm |
【新闻资讯】查看全部
道默推出回收聚酰胺环保新技术
2021-01-31 搜料网资讯: 近日,为加速推广可持续发展塑料解决方案, 道默化学 在上海沃尔沃汽车亚太区回收塑料应用技术交流会上推出TECHNYL 4EARTH和ECONAMID产品,向观众展示其在回收聚酰胺方面 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |