牌号简介 About |
---|
Alcudia PE071是一种低密度聚乙烯级材料,采用高压高压釜技术生产,特别适用于挤出涂层。这种材料在易加工性、良好的感官性能、良好的粘附性和低颈缩之间提供了充分的平衡。它不含任何添加剂。典型应用挤压涂层。共挤薄膜。注塑成型。Alcudia PE-071具有优异的拉伸性能,可在330°C的最高挤出温度下高速喷涂,最高可达850 m/m in和5 g/m²。这种材料在各种挤出条件下具有很低的颈部。挤出涂层的推荐熔融温度范围为275至330°C。共挤温度范围取决于加工聚合物。各生产线的加工条件应得到优化。 ALCUDIA® PE071 is a low density polyethylene grade, produced by high pressure autoclave technology, especially intended for extrusion coating. This material offers an adequate balance between easy processability, good organoleptic properties, excellent adhesion and low neck-in. It does not contain any additives. TYPICAL APPLICATIONS Extrusion coating. Coextruded thin film. Injection moulding. The excellent draw down properties of ALCUDIA® PE-071 allow high-speed coatings, up to 850 m/min and 5 g/m² at a maximum extrusion temperature of 330°C. This material has a very low neck-in throughout a wide range of extrusion conditions. Recommended melt temperature range for extrusion coating from 275 to 330°C. Temperature range for coextrusion depending on the processed polymers. Processing conditions should be optimised for each production line. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.919 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
8.5 | g/10min | ISO 1133 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
86.0 | ℃ | ISO 306/A |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
赢创德国新建硅涂层薄膜工厂
2016-06-13 赢创工业公司在德国马尔建了一处薄膜复合材料工厂,生产的外套膜,可用于有机溶剂纳滤和气体分离。 薄膜片的“外衣”由特殊硅或其他材料制成,这种复合材料薄膜经过进一步生产加工,制成耐溶性或不透气的螺旋缠绕状模块。相应的硅涂层也是由赢创自行生产,保证了薄膜所具备的分离性能。 “复合材料薄膜工厂的创立与我们持续发展优质薄膜业务的规划相一致,可直接为我们的客户提供先进的薄膜技术,提高材料分离领域的资源有效利用性。”赢创高性能聚合物业务线主管Matthias Kotten |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |