牌号简介 About |
---|
PPS/MI-HGR50是以PPS树脂为基础,填充玻璃纤维和特殊增韧成分的难熔PPS复合材料。机械性能好,耐高温,耐溶剂,电绝缘性能优异,强度高,吸水率低,模具收缩率低,尺寸稳定性好,耐辐射。不存在PPS固有的脆性缺陷,可以在更多领域替代其他塑料材料。由于其高性能,可用于高强度、高温、电绝缘和韧性要求的电器。如:防爆阀及阀圈、精密电器外壳、厚壁板、滑块、制动系统面板、电磁阀、齿轮、热电偶、活塞环等。 PPS/MI-hGR50 is toughing PPS compound, which is filled with glass fiber and special toughening ingredients based on the PPS resin. Good mechanical properties, high temperature resistance, solvent resistance, excellent electrical insulation properties, high intensity, low water absorption, low mold shrinkage, good dimensional stability, and radiation resistance. Without the defect of PPS's inherent brittleness, it can be used in more fields to replace other plastic materials. Owing to its high performance, it can be used to make appliances where high intensity, high-temperature, electrical insulation and toughness are both required. Such as: rotproof valves and valve circles, outer shells of precise electric appliance; thick wall panels, slide blocks, panels of braking system magnetic valves, gears, thermocouple and piston rings etc. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.65 | g/cm³ | 内部方法 |
收缩率 Shrinkage rate |
|||
MD MD |
0.25 | % | 内部方法 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
18 | kJ/m² | 内部方法 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
263 | ℃ | 内部方法 |
熔融温度 Melting temperature |
280 | ℃ | 内部方法 |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | 内部方法 | |
体积电阻率 Volume resistivity |
ohms·cm | 内部方法 | |
介电强度 Dielectric strength |
kV/mm | 内部方法 | |
介电常数 Dielectric constant |
|||
1 MHz 1 MHz |
内部方法 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
内部方法 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness 2 |
内部方法 | ||
拉伸强度 tensile strength |
MPa | 内部方法 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | 内部方法 | |
弯曲模量 Bending modulus |
MPa | 内部方法 | |
弯曲强度 bending strength |
MPa | 内部方法 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 HR |
【新闻资讯】查看全部
大连商品交易所2023年2月13日PVC行情表
2023-02-13 扫描上图二维码,可以免费下载 搜料 APP 大连商品交易所 日行情表 查询日期: 20230206本月第4个交易日 本年第20个交易日 说明: (1)价格:自2019年12月02日起,纤维板报价单位由元/张改 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |