牌号简介 About |
---|
67BER01是一种中分子量悬浮型PVC树脂,适用于刚性挤出制品。特别推荐用于刚性管及导管、刚性型材、刚性片材、非塑化管膜等。它结合了中等分子量与高表观密度使其在保持高机械性能的同时,适合于高产量下的易加工。它的平衡的热损失特性不允许静态发展,并减少了流动时间。 67BER01的孔隙度范围较窄,使其易于在恒定的润滑油水平下保持均匀的熔点。对润滑剂的要求最低。 57GMR01 is a low molecular weight suspension type PVC resin suitable for rigid injection moulding and rigid sheet extrusion applications. It is specially recommended for injection moulding of pipe fittings and calendering of opaque sheets. Its combination of low molecular weight with high melt flow makes it suitable for easy processing in injection moulded items. Uniform coarseness of the grains of this resin results in easy bulk handling, minimum requirement of lubricant and more uniform fluxing in the barrel. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表观密度 Apparent density |
0.55 | g/cm³ | ASTM D1895 |
K-Value K-Value 2 |
67.0 | ||
固有粘度 Intrinsic viscosity |
0.92 | ASTM D1243 | |
颗粒大小分布 Particle size distribution |
ASTM D1921 | ||
Retention on ASTM 40 mesh Retention on ASTM 40 mesh |
< 0.10 | % | ASTM D1921 |
Retention on ASTM 60 mesh Retention on ASTM 60 mesh |
< 5.0 | % | ASTM D1921 |
Through ASTM 140 mesh Through ASTM 140 mesh |
% | ASTM D1921 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热损耗 Heat loss |
% | ASTM D3030 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Dark Resin(for 100 g resin) Dark Resin(for 100 g resin) |
count/g | ||
Residual Vinyl Chloride Monomer Residual Vinyl Chloride Monomer |
ppm | ASTM D3749 | |
孔隙度 porosity |
|||
DOP DOP |
cm³/g | ASTM D3367 | |
流动时间 Flow time |
sec | ASTM D1895 |
备注 |
---|
2 @ 1% in cyclohexanone |
【新闻资讯】查看全部
黄岩模具定个小目的:4年后产值达200亿元
2017-01-23 日前,《黄岩模具产业发展规划》(以下简称《规划》)通过评审,提出模具产业“十三五”发展目标及2025年远景规划。 按照《规划》,力争到2020年,黄岩模具产业总产值达到200亿元,年均增长率7%左右。培育年产值3亿元以上企业15家,规模以上企业50家,新增上市企业1-2家。 黄岩素有“模具之乡”的美誉,模具产业是黄岩的主导产业和特色优势产业。据黄岩区经信局统计数据显示,截至2015年底,黄岩模具产业总产值145亿元,自2011年来年均增速达到7%左右,总销售 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |