牌号简介 About |
---|
HP-200是一种经聚丙烯认证的基本树脂,专为薄壁轻质制品的注塑成型而设计。HP-200具有良好的拉伸强度平衡性和中高流动加工性、高刚度、短循环、良好的LTS和良好的ESCR。HP-200推荐的加工温度在220°C至240°C之间,模具温度为20°C至50°C。HP-200符合FDA法规21CFR 177.1520和大多数有关在食品接触中使用聚丙烯的国际法规。可根据要求提供特定证书。 HP-200 is a Polypropylene certified prime resin designed for injection molding of thin-walled lightweight articles. HP-200 combines good balance of good tensile strength with medium-high flow processability high stiffness, short cycling, good LTHS and excellent ESCR. HP-200 recommended processing temperature is between 220° to 240°C with mold at 20°-50°C. HP-200 complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food. Specific certificates are available upon request. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.905 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
20 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
27 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
106 | ℃ | ASTM D648 |
维卡软化温度 Vicat Softening Temp |
152 | ℃ | ASTM D1525 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 tensile strength 2 |
|||
屈服 yield 2 |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 2 |
|||
屈服 yield 2 |
% | ASTM D638 | |
弯曲模量 Bending modulus 3 |
|||
1% 正割 1% secant 3 |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
3 0.051 in/min |
【新闻资讯】查看全部
科莱恩对创新和可持续发展的承诺获得了汉高和ICIS奖项的认可
2020-11-23 搜料网资讯: 专注于可持续发展和创新的特种化学品公司科莱恩近日宣布,公司获得了可持续发展和创新领域的多个高级奖项。汉高粘合剂技术公司向科莱恩颁发了2020年可持续发展奖。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |